Nominal voltage UN
240/415 V AC ±10 % (TN-S)
240/415 V AC ±10 % (TT)
Maximum continuous operating voltage UC (L-N)
Maximum continuous operating voltage UC (L-PE)
Maximum continuous operating voltage UC (N-PE)
Protective conductor current IPE
Type
DIN rail module, two-section, divisible
Standby power consumption PC
Nominal discharge current In (8/20) µs
Maximum discharge current Imax (8/20) µs
Surge protection fault message
Total discharge current ITotal (8/20) µs
Follow current interrupt rating Ifi (N-PE)
Short-circuit current rating ISCCR
Nominal frequency f<sub>N</sub>
Voltage protection level Up (L-N)
Connection method
Fork-type cable lug
Screw connection
Voltage protection level Up (L-PE)
Voltage protection level Up (N-PE)
Residual voltage Ures (L-N)
≤ 1.3 kV (at 3 kA)
≤ 1.4 kV (at 5 kA)
≤ 1.6 kV (at 10 kA)
≤ 1.8 kV (at I<sub>n</sub>)
Tightening torque
3 Nm ... 3.5 Nm
30 lb<sub>f</sub>-in.
Residual voltage Ures (L-PE)
≤ 1.4 kV (at 3 kA)
≤ 1.5 kV (at 5 kA)
≤ 1.7 kV (at 10 kA)
≤ 2 kV (at I<sub>n</sub>)
Conductor cross-section flexible
1.5 mm² ... 25 mm²
1.5 mm² ... 35 mm² (without ferrule)
2x 1.5 mm² ... 16 mm² (2 conductors with the same cross-section)
Residual voltage Ures (N-PE)
≤ 0.1 kV (at 3 kA)
≤ 0.3 kV (at 5 kA)
≤ 0.4 kV (at 10 kA)
≤ 0.5 kV (at I<sub>n</sub>)
Conductor cross-section rigid
1.5 mm² ... 50 mm²
2x 1.5 mm² ... 16 mm² (2 conductors with the same cross-section)
TOV behavior at UT (L-N)
415 V AC (5 s / withstand mode)
460 V AC (120 min / safe failure mode)
Conductor cross-section AWG
TOV behavior at UT (L-PE)
1464 V AC (200 ms/withstand mode)
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
TOV behavior at UT (N-PE)
1200 V AC (200 ms / withstand mode)
Conductor cross-section, flexible, with ferrule, with plastic sleeve
1.5 mm² ... 35 mm²
2x 1.5 mm² ... 10 mm² (2 conductors with the same cross-section)
Conductor cross-section, flexible, with ferrule, without plastic sleeve
1.5 mm² ... 25 mm²
2x 1.5 mm² ... 16 mm² (2 conductors with the same cross-section)