Nominal voltage UN
240/415 V AC ±10 % (TN-S)
240/415 V AC ±10 % (TT)
Maximum continuous operating voltage UC (L-N)
Maximum continuous operating voltage UC (L-PE)
Maximum continuous operating voltage UC (N-PE)
Protective conductor current IPE
Type
DIN rail module, two-section, divisible
Standby power consumption PC
Nominal discharge current In (8/20) µs
Maximum discharge current Imax (8/20) µs
Surge protection fault message
Optical, remote indicator contact
Total discharge current ITotal (8/20) µs
Follow current interrupt rating Ifi (N-PE)
Short-circuit current rating ISCCR
Nominal frequency f<sub>N</sub>
Voltage protection level Up (L-N)
Connection name
Remote fault indicator contact
Voltage protection level Up (L-PE)
Voltage protection level Up (N-PE)
Max. required back-up fuse
Residual voltage Ures (L-N)
≤ 1.3 kV (at 3 kA)
≤ 1.4 kV (at 5 kA)
≤ 1.6 kV (at 10 kA)
≤ 1.8 kV (at I<sub>n</sub>)
AC operating voltage
5 V AC ... 150 V AC (≤ 5000 m (amsl))
5 V AC ... 250 V AC (≤ 2000 m (amsl) at pollution degree 2)
Residual voltage Ures (L-PE)
≤ 1.4 kV (at 3 kA)
≤ 1.5 kV (at 5 kA)
≤ 1.7 kV (at 10 kA)
≤ 2 kV (at I<sub>n</sub>)
Residual voltage Ures (N-PE)
≤ 0.1 kV (at 3 kA)
≤ 0.3 kV (at 5 kA)
≤ 0.4 kV (at 10 kA)
≤ 0.5 kV (at I<sub>n</sub>)
DC operating voltage
125 V DC (≤ 5000 m (amsl))
30 V DC
30 V DC (≤ 5000 m (amsl))
TOV behavior at UT (L-N)
415 V AC (5 s / withstand mode)
460 V AC (120 min / safe failure mode)
TOV behavior at UT (L-PE)
1464 V AC (200 ms/withstand mode)
Insulation type
The product has double/reinforced insulation between the main and auxiliary circuit.
TOV behavior at UT (N-PE)
1200 V AC (200 ms / withstand mode)
Connection method
Fork-type cable lug
Push-in connection
Screw connection
Tightening torque
3 Nm ... 3.5 Nm
30 lb<sub>f</sub>-in.