Protective conductor current IPE
Standby power consumption PC
Nominal discharge current In (8/20) µs
Maximum discharge current Imax (8/20) µs
Impulse discharge current (10/350) µs, peak value limp
Type
DIN rail module, two-section, divisible
Total discharge current ITotal (8/20) µs
Total discharge current ITotal (10/350) µs
Installation location of the disconnect device
Voltage protection level Up
Residual voltage Ures
≤ 3 kV (at 3 kA)
≤ 3.2 kV (at 5 kA)
≤ 3.6 kV (at 10 kA)
≤ 4.2 kV (at I<sub>n</sub>)
End-of-life mode
OCFM (Open-Circuit Failure Mode)
Maximum continuous operating voltage UCPV
Short-circuit current rating ISCPV
Surge protection fault message
Optical, remote indicator contact
Open-circuit voltage UOCSTC
Insulation resistance Riso
Continuous operating current ICPV
Connection name
Remote fault indicator contact
Max. required back-up fuse
AC operating voltage
5 V AC ... 150 V AC (≤ 5000 m (amsl))
5 V AC ... 250 V AC (≤2000 m (amsl))
DC operating voltage
125 V DC (≤ 5000 m (amsl))
30 V DC (≤ 5000 m (amsl))
Insulation type
The product has double/reinforced insulation between the main and auxiliary circuit.
Tightening torque
0.5 Nm ... 0.6 Nm
2.5 Nm ... 3 Nm
Conductor cross-section flexible
0.25 mm² ... 1.5 mm²
1.5 mm² ... 16 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Conductor cross-section rigid
0.25 mm² ... 1.5 mm²
1.5 mm² ... 25 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Conductor cross-section AWG
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 1.5 mm²
1.5 mm² ... 16 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Conductor cross-section, flexible, with ferrule, without plastic sleeve
0.25 mm² ... 0.75 mm²
1.5 mm² ... 16 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)