Nominal discharge current In (8/20) µs
Note
2018
2019
Depending on the installation height, additional minimum lateral distances to grounded, conductive surfaces may need to be observed. See the table in the download area under the item Packing slip in the installation notes.
Maximum discharge current Imax (8/20) µs
Total discharge current ITotal (8/20) µs
Maximum continuous operating voltage UCPV
1200 V DC (at ≤ 5000 m (amsl))
1800 V DC (at ≤ 5000 m (amsl))
Open-circuit voltage UOCSTC
Type
DIN rail module, two-section, divisible
Installation location of the disconnect device
End-of-life mode
OCFM (Open-Circuit Failure Mode)
Surge protection fault message
Conductor cross-section flexible
1.5 mm² ... 16 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Conductor cross-section rigid
1.5 mm² ... 25 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Conductor cross-section AWG
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
1.5 mm² ... 16 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Conductor cross-section, flexible, with ferrule, without plastic sleeve
1.5 mm² ... 16 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Depth
51.5 mm (incl. DIN rail 7.5 mm)
Flammability rating according to UL 94
Mode of protection
(DC-) - PE
(DC+) - (DC-)
(DC+) - PE
Nominal discharge current I<sub>n</sub> (8/20) µs
Maximum discharge current I<sub>max</sub> (8/20) µs
Total discharge current I<sub>Total </sub>(8/20) µs
Maximum continuous operating voltage U<sub>CPV</sub>
1200 V DC (at ≤ 5000 m (amsl))
1800 V DC (at ≤ 5000 m (amsl))
Open-circuit voltage U<sub>OCSTC</sub>