Nominal input voltage UIN
Nominal input current at UIN
Volume concentration H2S (Hydrogen sulfide)
Volume concentration NO2 (Nitrogen dioxide)
Volume concentration Cl2 (Chlorine)
Volume concentration SO2 (Sulfur dioxide)
Description of the input
IEC 61131-2 types 1 and 3
Cable length
max. 30 m (to the sensor)
Connection method
M12 connector
M12 connector, A-coded
Note on the connection method
Push-pull fast connection according to IEC 61076-2-010 or screw connection according to IEC 61076-2-101
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
Protective circuit
Overload protection; yes
Reverse polarity protection; yes
Short-circuit protection; yes
Reverse polarity protection
Amount of process data
0 Byte (Output data)
3 Byte (Input data)
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Designation
IO-Link port supply (L+)
Supply of the sensors (from L+)
Nominal voltage for I/O supply
24 V DC (Provided via the IO-Link interface of the IO-Link master.)
Supply voltage range
18 V DC ... 30 V DC (including all tolerances, including ripple)
Nominal current per device
Current consumption
max. 800 mA (device dependent; observe the current of the IO-Link master that is made available via L+)
max. 800 mA (per port)
Test voltage: 24 V supply L+ (IO-Link)/functional ground
Ambient temperature (operation)
-25 °C ... 70 °C
-40 °C ... 70 °C (Extended, see section “Use under extreme ambient conditions” in the data sheet)
Degree of protection
IK08 (Impact resistance level)
IP65/IP67/IP69
Air pressure (operation)
70 kPa ... 108 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
66 kPa ... 108 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)