Note regarding documentation
For details about the PCB connectors used, refer to the technical data for MC 1,5/10-STF-3,5 (1847204)
Assembly note
<b>NOTE:</b> Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Nominal voltage U<sub>N</sub>
Max. current carrying capacity per path
Current carrying capacity per slot
Sensor/actuator connection system
Connection method
Pluggable screw connection
Conductor cross-section Flexible signal line
Conductor cross-section Flexible power supply
Connection cross section AWG Flexible signal line
Connection cross section AWG Flexible power supply
Stripping length Signal line
Stripping length of the sheath
Tightening torque, cover screw
Slot/position = Wire color or connection
1 / 2 (B) = 1 / 2 = GYPK
1 / 4 (A) = 1 / 4 = WH
1-8 / 1 (+ 120 V) = U<sub>N</sub> = BN
1-8 / 3 (0 V) = 0 V = BU
1-8 / 5 (PE) = PE = GNYE
2 / 2 (B) = 2 / 2 = RDBU
2 / 4 (A) = 2 / 4 = GN
3 / 2 (B) = 3 / 2 = WHGN
3 / 4 (A) = 3 / 4 = YE
4 / 2 (B) = 4 / 2 = BNGN
4 / 4 (A) = 4 / 4 = GY
5 / 2 (B) = 5 / 2 = WHYE
5 / 4 (A) = 5 / 4 = PK
6 / 2 (B) = 6 / 2 = YEBN
6 / 4 (A) = 6 / 4 = RD
7 / 2 (B) = 7 / 2 = WHGY
7 / 4 (A) = 7 / 4 = BK
8 / 2 (B) = 8 / 2 = GYBN
8 / 4 (A) = 8 / 4 = VT
Flammability rating according to UL 94
Material of contact, master cable side
Material of the contact carrier on the master cable side
Material of contact surface, master cable side
Ambient temperature (operation)