Product type
PCB terminal block
Printed circuit board terminal
Solder pins per potential
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Connection method
Push-in spring connection
Conductor cross-section rigid
0.2 mm² ... 1.5 mm² (Push-in connection)
0.2 mm² ... 1.5 mm² (When connecting and possibly adjusting a solid conductor of 1.5 mm², the mechanical lateral forces, which can affect the terminal block, have to be absorbed by lateral support.)
Conductor cross-section flexible
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface terminal point (top layer)
Metal surface soldering area (top layer)
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Glow wire flammability index GWFI according to EN 60695-2-12
Glow wire ignition temperature GWIT according to EN 60695-2-13
Temperature for the ball pressure test according to EN 60695-10-2
Color (Actuating element)
Specification
IEC 60068-2-6:2007-12
IEC 60512-3-1:2002-02
IEC 60695-2-10:2013-04
IEC 60947-1:2007-06 + A1:2010-12
IEC 60947-7-4:2019-01
IEC 60999-1:1999-11
Conductor cross-section/conductor type/tractive force setpoint/actual value
0.2 mm² / flexible / > 10 N
0.2 mm² / solid / > 10 N
1.5 mm² / flexible / > 40 N
1.5 mm² / solid / > 40 N
Requirement temperature-rise test
The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature.
Insulation resistance, neighboring positions
Comparative tracking index (IEC 60112)
Rated insulation voltage (III/3)
minimum clearance value - non-homogenous field (III/3)
minimum creepage distance (III/3)
Rated insulation voltage (III/2)
minimum clearance value - non-homogenous field (III/2)