CK8,0-ED-16,00M AG Crimp contact

for HC-M-...-35 contact carriers

Note on crimp connection technology:<br/> <br/>For flexible wires only. The specified conductor cross-sections refer to the nominal cross-section of the cable used.<br/> <br/>The wiring space of the crimp connection technology is designed for fine-st

The quality of a crimp connection is determined by DIN EN 60352-2.

The contacts are qualified for crimping dies in accordance with DIN 46235. Klauke, for example, offers an appropriate tool: Crimping dies from the D22 series are required for the EKM6022 battery-powered hydraulic crimping pliers. Due to the narrow cr

Crimp contact

HC-M-...-35

turned

Pin

Crimp connection

19 mm

16 mm² ... 16 mm²

6 ... 6

Cu alloy (lead-free)

Ag

8 mm

100 A (Take into account the derating of the contact insert used. The rated current corresponds to the maximum possible connection cross-section.)

≥ 500

-40 °C ... 125 °C