Contact holder in insertRequirements >20 N
Mounting type
Direct plug-in method
without
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Connection method
Push-in spring connection
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Cylindrical gauge a x b / diameter
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Color (Actuating element)
Recommendation
Further information and detailed dimensions are available in the download area.
Safety note
• The item is intended to be an unencapsulated plug for installation in a housing.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Specification
IEC 60068-2-27:2008-02
IEC 60068-2-6:2007-12
IEC 60512-1-1:2002-02
IEC 60512-1-2:2002-02
IEC 60512-13-5:2006-02
IEC 60512-15-1:2008-05
IEC 60512-5-1:2002-02
IEC 60512-9-1:2010-03
IEC 60664-1:2007-04
IEC 60999-1:1999-11
IEC 61984:2008-10
Conductor cross-section/conductor type/tractive force setpoint/actual value
0.34 mm² / solid / > 15 N
1.5 mm² / flexible / > 40 N
1.5 mm² / solid / > 40 N
Contact holder in insert<br/>Requirements >20 N
Tested number of positions
Rated insulation voltage (III/2)
minimum clearance value - non-homogenous field (III/2)
minimum creepage distance (III/2)