Connection method On the device side
Manual solder/slip on connection (2.8 mm x 0.8 mm)
Frequency of connections between conductors of the same cross section
max. 10 (if the conductor is connected more than once, seal and cap may need to be replaced.)
Conductor cross-section flexibel
Conductor cross-section solid
Connection cross section AWG
Tightening torque Union nut
Tightening torque Contact carrier
Tightening torque Locking nut
Wrench size Contact carrier
Rated surge voltage (II/2)
Rated surge voltage (III/2)
Rated surge voltage (III/3)
Rated voltage (II/2)
320 V (with insulating sleeve)
Rated voltage (III/2)
160 V (with insulating sleeve)
Rated voltage (III/3)
160 V (with insulating sleeve)
Nominal voltage U<sub>N</sub>
Nominal current I<sub>N</sub>
Flammability rating according to UL 94
Material wire insulation
PVC / PE
PVC/PE/TPE/rubber
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter
VDE 0295 class 1 to 6/min. 0.15 mm
Wire diameter including insulation
Ambient temperature (operation)
-25 °C ... 50 °C (when the conductor is connected. Specifications of the cable manufacturer must also be observed.)
-25 °C ... 80 °C (Specifications of the cable manufacturer must be observed.)
Temperature when conductor connected
-5 °C ... 50 °C (specifications of the cable manufacturer must also be observed)