Connection method On the device side
Manual solder/slip on connection
Connection method On the field side
Frequency of connections between conductors of the same cross section
10 (if the conductor is connected more than once, seal and cap may need to be replaced.)
Conductor cross-section flexibel
Conductor cross-section solid
Connection cross section AWG
Tightening torque Union nut
Tightening torque Contact carrier
Tightening torque Locking nut
Wrench size Contact carrier
Rated surge voltage (III/3)
Rated voltage (II/2)
630 V (with insulating sleeve)
Rated voltage (III/2)
320 V (with insulating sleeve)
Rated voltage (III/3)
250 V (with insulating sleeve)
Nominal voltage U<sub>N</sub>
Nominal current I<sub>N</sub>
Flammability rating according to UL 94
Contact surface material
Pre-nickel plated and tin-plated
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter
VDE 0295 Cl.2-5, min. wire diameter 0.2 mm
Wire diameter including insulation
Ambient temperature (operation)
Temperature when conductor connected
-25 °C ... 50 °C (specifications of the cable manufacturer must also be observed)