General
Connectors may be operated only when there is no load/voltage.
Contact numbering
1 - 4 (power contacts)
11 - 12 (control contacts)
Type of the screw connection
Rated voltage (III/3)
250 V (control contacts)
400 V (Phase-ground power contacts)
690 V (Phase-phase power contacts)
Rated voltage for power contacts
Rated surge voltage
4 kV (control contacts)
6 kV (Phase-phase power contacts)
Rated current
10 A (control contacts)
40 A (power contacts)
Connection in acc. with standard
Conductor cross-section
10 mm² ... 10 mm² (power contacts)
Connection cross section AWG
Tightening torque
0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing)
Stripping length of the individual wire
16 mm (10 mm² power circuit)
Drill hole distance, horizontal
Drill hole distance, vertical
Width of the assembly cutout
Length of the assembly cutout
Flammability rating according to UL 94
Material of contact surface, power contact
Insertion/withdrawal cycles
Ambient temperature (operation)
-40 °C ... 125 °C (including heating up of contacts)
Assembly note
Connectors may only be actuated when there is no load/voltage.