Contact holder in insertRequirements >20 N
Mounting type
Latch mechanism/latching at position 5
Latching flange
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Connection method
Lever Push-in connection
Push-in spring connection
Connection direction of the conductor to plug-in direction
Conductor cross-section rigid
0.2 mm² ... 1.5 mm²
0.75 mm² ... 10 mm²
Conductor cross-section flexible
0.2 mm² ... 1.5 mm²
0.75 mm² ... 6 mm²
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, without plastic sleeve
0.25 mm² ... 1.5 mm²
0.75 mm² ... 6 mm²
Conductor cross-section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 1 mm²
0.75 mm² ... 6 mm²
Cylindrical gauge a x b / diameter
2.4 mm x 1.5 mm / 1.5 mm
4.3 mm x 4.0 mm / 4.0 mm
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface terminal point (top layer)
Metal surface contact area (top layer)
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Color (Actuating element)
Notes on operation
In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load.