Product type
Panel feed-through terminal block
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Connection method
Cable lug connection
Screw connection with tension sleeve
Connection direction of the conductor to plug-in direction
Single-conductor/terminal point multi-stranded
Conductor cross-section flexible
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
2 conductors with the same cross section, stranded
2 conductors with same cross section, flexible
2 conductors with same cross section, flexible, with ferrule without plastic sleeve
Internal cylindrical gage
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Glow wire flammability index GWFI according to EN 60695-2-12
Glow wire ignition temperature GWIT according to EN 60695-2-13
Temperature for the ball pressure test according to EN 60695-10-2
Safety note
• The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection.
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• To maintain the nominal voltage, align the cable lugs straight and centered, and cast the terminals on the inside.
Specification
IEC 60068-2-6:2007-12
IEC 60695-2-11:2014-02
IEC 60947-1:2007-06 + A1:2010-12
IEC 60947-7-1:2009-04
Conductor cross-section/conductor type/tractive force setpoint/actual value
25 mm² / solid / > 135 N
35 mm² / flexible / > 190 N
95 mm² / flexible / > 351 N
95 mm² / solid / > 351 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K