Product type
Panel feed-through terminal block
Solder pins per potential
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Connection method
Push-in spring connection
Push-lock connection
Connection direction of the conductor to plug-in direction
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section, flexible, with ferrule, without plastic sleeve
1.5 mm² ... 6 mm²
2.5 mm² ... 16 mm²
Conductor cross-section, flexible, with ferrule, with plastic sleeve
1.5 mm² ... 6 mm²
2.5 mm² ... 16 mm²
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Glow wire flammability index GWFI according to EN 60695-2-12
Glow wire ignition temperature GWIT according to EN 60695-2-13
Temperature for the ball pressure test according to EN 60695-10-2
Safety note
• The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection.
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
There is no electrical contact to the housing. Make sure that protective grounding is provided for green/yellow color variants and articles marked with PE.
Specification
IEC 60947-1:2007-06 + A1:2010-12
Comparative tracking index (IEC 60112)
Rated insulation voltage (III/3)
minimum clearance value - non-homogenous field (III/3)