Product type
Panel feed-through terminal block
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Connection method
Cable lug connection
Screw connection with tension sleeve
Connection direction of the conductor to plug-in direction
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
2 conductors with same cross section, rigid
2 conductors with same cross section, flexible
2 conductors with same cross section, flexible, with ferrule without plastic sleeve
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Internal cylindrical gage
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Glow wire flammability index GWFI according to EN 60695-2-12
Glow wire ignition temperature GWIT according to EN 60695-2-13
Temperature for the ball pressure test according to EN 60695-10-2
Safety note
• Observe the technical data provided here and refer to the documents listed under “Downloads”. The download area contains important information, such as installation notes, technical drawings, and 3D data.
• Only electrically qualified personnel may install and operate the product.<br/>To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering.
• The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection.
• To maintain the nominal voltage, align the cable lugs straight and centered, and cast the terminals on the inside.
Specification
IEC 60068-2-27:2008-02
IEC 60068-2-6:2007-12
IEC 60695-2-11:2014-02
IEC 60947-7-1:2009-04
Conductor cross-section/conductor type/tractive force setpoint/actual value
16 mm² / flexible / > 100 N
25 mm² / stranded / > 135 N
6 mm² / flexible / > 80 N
6 mm² / solid / > 80 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Application
with spacer plate
without spacer plate
Comparative tracking index (IEC 60112)
Rated insulation voltage (III/3)