Product type
Panel feed-through terminal block
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Connection method
Push-in spring connection
Screw connection with tension sleeve
Connection direction of the conductor to plug-in direction
Conductor cross-section rigid
1.5 mm² ... 16 mm²
6 mm² ... 16 mm²
Conductor cross-section flexible
1.5 mm² ... 16 mm²
6 mm² ... 16 mm²
Conductor cross-section, flexible, with ferrule, without plastic sleeve
1.5 mm² ... 16 mm²
6 mm² ... 16 mm²
Conductor cross-section, flexible, with ferrule, with plastic sleeve
1.5 mm² ... 16 mm²
6 mm² ... 16 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
1.5 mm² ... 4 mm²
4 mm² ... 6 mm²
Single-conductor/terminal point multi-stranded
Conductor cross-section AWG
Internal cylindrical gage
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Glow wire flammability index GWFI according to EN 60695-2-12
Glow wire ignition temperature GWIT according to EN 60695-2-13
Temperature for the ball pressure test according to EN 60695-10-2
Safety note
• Observe the technical data provided here and refer to the documents listed under “Downloads”. The download area contains important information, such as installation notes, technical drawings, and 3D data.
• Only electrically qualified personnel may install and operate the product.<br/>To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering.
• The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection.