Contact holder in insertRequirements >20 N
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Mounting type
Latching flange
SKEDD - Direct plug-in technology
Connection method
Push-in spring connection
Connection direction of the conductor to plug-in direction
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
Cylindrical gauge a x b / diameter
recommended crimping tool
1212034 CRIMPFOX 6
1212045 CRIMPFOX 10S
ferrules without insulating collar, according to DIN 46228‑1
Cross section: 0.25 mm²; Length: 7 mm
Cross section: 0.34 mm²; Length: 7 mm
Cross section: 0.5 mm²; Length: 8 mm ... 10 mm
Cross section: 0.75 mm²; Length: 10 mm
Cross section: 1 mm²; Length: 10 mm
Cross section: 2.5 mm²; Length: 10 mm
ferrules with insulating collar, according to DIN 46228‑4
Cross section: 0.25 mm²; Length: 8 mm
Cross section: 0.34 mm²; Length: 8 mm ... 10 mm
Cross section: 0.5 mm²; Length: 8 mm ... 10 mm
Cross section: 0.75 mm²; Length: 8 mm ... 10 mm
Cross section: 1 mm²; Length: 8 mm ... 10 mm
Cross section: 1.5 mm²; Length: 8 mm ... 10 mm
Cross section: 2.5 mm²; Length: 10 mm
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface terminal point (top layer)
Metal surface terminal point (middle layer)
Nickel (1.5 µm - 4 µm Ni)
Metal surface contact area (top layer)
Metal surface contact area (middle layer)
Nickel (1.5 µm - 4 µm Ni)
Insulating material group
CTI according to IEC 60112