Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Tightening torque
0.25 Nm ... 0.3 Nm (In extreme climatic conditions, we recommend the minimum tightening torque.)
Connection method
Push-in spring connection
Connection direction of the conductor to plug-in direction
Conductor/PCB connection direction
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Cylindrical gauge a x b / diameter
recommended crimping tool
ferrules without insulating collar, according to DIN 46228‑1
Cross section: 0.5 mm²; Length: 8 mm ... 10 mm
Cross section: 0.75 mm²; Length: 8 mm ... 10 mm
Cross section: 1 mm²; Length: 8 mm ... 10 mm
Cross section: 1.5 mm²; Length: 8 mm ... 10 mm
Cross section: 2.5 mm²; Length: 10 mm
ferrules with insulating collar, according to DIN 46228‑4
Cross section: 0.5 mm²; Length: 8 mm ... 10 mm
Cross section: 0.75 mm²; Length: 8 mm ... 10 mm
Cross section: 1 mm²; Length: 8 mm ... 10 mm
Cross section: 1.5 mm²; Length: 10 mm
Cross section: 2.5 mm²; Length: 10 mm
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface terminal point (top layer)
Metal surface contact area (top layer)
Insulating material group