Typical input current at UN
200 mA (200 mA supply / ≤ 20 mA input current per signal)
Insulation
Functional insulation
Reinforced insulation
Rated surge voltage
2.3 kV (1.2/50 μs)
6 kV (1.2/50 μs)
Nominal input voltage U<sub>N</sub>
Typical input current at U<sub>N</sub>
200 mA (200 mA supply / ≤ 20 mA input current per signal)
Contact switching type
Single contact, 1 changeover contact
Maximum switching voltage
150 V AC/DC (Maximum switching voltage of 230 V AC: the maximum switching voltage of 230 V is only permitted if the same fuse circuit is used. The outputs are not suitable for switching different outer conductors.)
Limiting continuous current
Connection in acc. with standard
Connection method
IDC/FLK pin strip
Screw connection
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Degree of protection (Installation location)
≥ IP54 (Installation location)
Ambient temperature (operation)