Test voltage: PROFINET interface 1 / 24 V communications voltage (UL) feed-in
Test voltage: PROFINET interface 2 / 24 V communications voltage (UL) feed-in
Test voltage: 24 V communications voltage (UL) feed-in / functional ground
Note on dimensions
The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
EMC note
EMC: class A product, see manufacturer's declaration in the download area
CCCex note
Use in potentially explosive areas is not permitted in China.
Supported protocols
DCP
LLDP
MRP
PROFINET
SNMP
Connection method
Bus base module
Push-in connection
RJ45 socket, auto negotiation and auto crossing
Transmission speed
100 Mbps
100 Mbps (Full duplex)
Transmission physics
Ethernet in RJ45 twisted pair
Max. number of local bus devices
63 (Redundant PROFIBUS PA segments and AXL P I/O modules. Consider the logic current consumed by the devices.)
Number of supported devices
max. 63 (per station)
max. 8 (per redundant PROFIBUS PA segments)
Scope of supply
including bus base module and connectors
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC
5 V DC (via bus base module)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw
125 mA (24 V DC)
3 A (via bus base module)
max. 3 A (via bus base module)
max. 4.15 A (19.2 V DC)
Protective circuit
Reverse polarity protection; electronic
Surge protection; electronic
Test voltage: PROFINET interface 1 / PROFINET interface 2
Test voltage: PROFINET interface 1 / 24 V communications voltage (U<sub>L</sub>) feed-in
Test voltage: PROFINET interface 1 / functional ground
Test voltage: PROFINET interface 2 / 24 V communications voltage (U<sub>L</sub>) feed-in
Test voltage: PROFINET interface 2 / functional ground
Test voltage: 24 V communications voltage (U<sub>L</sub>) feed-in / functional ground
Note on the connection method
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
-40 °C ... 50 °C (Mounting position: any)
-40 °C ... 70 °C (Mounting position: panel mounting on horizontal DIN rail)