Inrush current integral (I2t)
Nominal input voltage range
Input voltage range
10 V DC ... 32 V DC (> 10.5 V DC start)
Setting range of the output voltage (USet)
30 V DC ... 56 V DC (> 48 V DC, constant capacity restricted)
Nominal output current (IN)
Input voltage range DC
10 V DC ... 32 V DC (> 10.5 V DC start)
Voltage type of supply voltage
Inrush current integral (I<sup>2</sup>t)
Mains buffering time
typ. 12 ms (24 V DC)
typ. 2 ms (12 V DC)
Current consumption
1.6 A (24 V DC)
3.2 A (12 V DC)
Input fuse
6.3 A (slow-blow, internal)
Efficiency
> 87 % (at 24 V DC and nominal values)
Setting range of the output voltage (U<sub>Set</sub>)
30 V DC ... 56 V DC (> 48 V DC, constant capacity restricted)
Nominal output current (I<sub>N</sub>)
Derating
60 °C ... 70 °C (2.5 %/K)
Feedback voltage resistance
Protection against overvoltage at the output (OVP)
Residual ripple
< 20 mV<sub>PP</sub> (20 MHz)
Peak switching voltages nominal load
< 10 mV<sub>PP</sub> (20 MHz)
Maximum no-load power dissipation
Power loss nominal load max.
Connection in parallel
yes, for assembling redundant systems and increasing efficiency
Fuse protection (secondary side)
Output description
U<sub>OUT</sub> > 0.9 x U<sub>N</sub>: High signal
Connection method
Pluggable screw connection
Conductor cross-section, rigid min.
Conductor cross-section, rigid max.
Conductor cross-section flexible min.
Conductor cross-section flexible max.
Conductor cross-section AWG min.
Conductor cross-section AWG max.
Types of signaling
Active switching output
LED
Note on status display
LED on
U<sub>OUT</sub> > 0.9 x U<sub>N</sub>: LED ON