Nominal input voltage UIN
Nominal input current at UIN
Test voltage: 5 V supply of the local bus (UBus) / 24 V supply (I/Os)
Note on dimensions
The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
Test voltage: 5 V supply of the local bus (UBus) / functional ground
Connection method
Bus base module
Push-in connection
Required configuration data
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
Current flow
linear until nominal current is reached, then constantly approx. 2.4 mA
Input filter time
< 100 µs
1000 µs
3000 µs (Default)
Protective circuit
Polarity reversal protection of the inputs; parallel diode (30 V, 5 s)
Reverse polarity protection; parallel diode; with external 5 A fuse (only for commissioning)
Surge protection; electronic (35 V, 0.5 s)
Mounting position
any (no temperature derating)
Scope of supply
including bus base module and Axioline F connectors
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC
5 V DC (via bus base module)
Current draw
max. 120 mA (up to HW 01)
max. 30 mA
max. 60 mA (from HW 02)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Protection
max. 8 A (polarity reversal protection up to 5 A)
Test voltage: 5 V supply of the local bus / 24 V supply (I/Os)
Test voltage: 5 V supply of the local bus (U<sub>Bus</sub>) / functional ground
Test voltage: 24 V supply (I/O) / functional ground
Note on the connection method
Please observe the information provided on conductor cross-sections in the “Axioline F: system and installation” user manual.
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG