Test voltage: 5 V supply of the local bus (UBus) / 24 V supply (I/Os)
Test voltage: 5 V supply of the local bus (UBus)/analog outputs
Test voltage: 5 V supply of the local bus (UBus) / functional ground
Note on dimensions
The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
Connection method
Bus base module
Push-in connection
Required configuration data
Note regarding the connection technology
Protective circuit
Reverse polarity protection; Polarity protection diode
Short-circuit and overload protection; Electronic
Surge protection; electronic (35 V, 0.5 s)
Transient protection; Suppressor diode
Representation of output values
Current output signal
0 mA ... 20 mA
4 mA ... 20 mA
Load/output load current output
Voltage output signal
-10 V ... 10 V
-5 V ... 5 V
0 V ... 10 V
0 V ... 5 V
Load/output load voltage output
Mounting position
any (no temperature derating)
Scope of supply
including bus base module and Axioline F connectors
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC
5 V DC (via bus base module)
Current draw
max. 110 mA (4 current channels, 20 mA output, 500 Ω load)
max. 125 mA (4 current channels, 24 mA output, 500 Ω load)
max. 150 mA
max. 85 mA (4 voltage channels, 10 V output)
typ. 120 mA
typ. 60 mA (4 voltage channels, 10 V output)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption
min. 40 mA (internal current consumption, no load, 0 V output)
Test voltage: 5 V supply of the local bus / 24 V supply (I/Os)
Test voltage: 5 V supply of the local bus (U<sub>Bus</sub>)/analog outputs
Test voltage: 5 V supply of the local bus (U<sub>Bus</sub>) / functional ground
Test voltage: 24 V supply (I/O)/analog outputs
Test voltage: 24 V supply (I/O) / functional ground
Test voltage: Analog outputs/functional ground
Note on the connection method
Please observe the information provided on conductor cross-sections in the “Axioline F: system and installation” user manual.
Conductor cross-section, rigid