Nominal input voltage UIN
Nominal input current at UIN
Note on dimensions
Specfications with connectors
Connection method
Inline connector
Inline data jumper
RJ45 jack
Spring-cage connection
Transmission speed
500 kbps / 2 Mbps (automatic detection, no combined system)
Number of supported devices
Number of local bus devices that can be connected
Number of devices with parameter channel
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
Typical input current per channel
Protective circuit
Reverse polarity protection; Suppressor diode
Short-circuit and overload protection; Freewheeling circuit in the output driver
Output voltage
24 V DC -1 V (At nominal current)
Max. current carrying capacity per output
Maximum output current per module
Output voltage when switched off
Output current when switched off
max. 500 µA (When not loaded, a voltage can be measured even at an output that is not set.)
Reverse voltage resistance to short pulses
Behavior with inductive overload
Behavior at voltage switch-off
The output follows the power supply without delay
Signal delay
< 235 µs (t<sub>off</sub>, load = 0.5 A)
< 350 µs (t<sub>off</sub>, no load)
< 40 µs (t<sub>on</sub>, no load)
< 50 µs (t<sub>on</sub>, load = 0.5 A)
Output current with ground connection interrupt when switched off