Typ. starting time with Us
< 100 ms (with U<sub>s</sub> when controlled via A1)
Rated control circuit supply voltage US
20.4 V DC ... 26.4 V DC
24 V DC -15 % / +10 %
Rated control supply current IS
Application
Ex
High demand
Low demand
Safe switch off
Diagnostic supply voltage UD
Input current at UD
6 mA (at 21-A2 for U<sub>D</sub>; depending on load + 100 mA at M1 and 22)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Inrush current at UD
typ. 2.5 A (Δt < 20 µs at U<sub>D</sub>)
Typ. starting time with U<sub>s</sub>
< 100 ms (with U<sub>s</sub> when controlled via A1)
Typical release time
< 35 ms (when controlled via A1)
Maximum power dissipation for nominal condition
3.28 W (I<sub>L</sub>² = 36 A²)
Rated surge voltage/insulation
Rated control circuit supply voltage U<sub>S</sub>
20.4 V DC ... 26.4 V DC
24 V DC -15 % / +10 %
Rated control supply current I<sub>S</sub>
Power consumption at U<sub>S</sub>
Inrush current
max. 100 mA
max. 6 A
min. 1 mA
min. 3 mA
typ. 400 mA (Δt < 10 µs at U<sub>s</sub>)
Filter time
≥ 100 ms (at A1-A2; test pulse rate)
max. 2 ms (at A1-A2; test pulse width)
Diagnostic supply voltage U<sub>D</sub>
Input current at U
6 mA (at 21-A2 for U<sub>D</sub>; depending on load + 100 mA at M1 and 22)
Inrush current at U<sub>D</sub>
typ. 2.5 A (Δt < 20 µs at U<sub>D</sub>)
Output description
2 N/C contacts in series, without delay, not floating (reference ground: A2)
2 N/O contacts in series, without delay, floating
PNP
Number of outputs
1 (non-safety-related)
1 (safety-related)
Contact switching type
1 confirmation current path
1 enabling current path
Contact material
AgCuNi, + Au
AgSnO<sub>2</sub>
Switching voltage
max. 250 V AC/DC
max. 26.4 V DC
min. 12 V AC/DC
min. 20.4 V DC
Switching capacity
4 A (24 V (DC13))
5 A (250 V (AC15))
Limiting continuous current
100 mA
4 A (Low demand)
6 A (High demand)
Sq. Total current
36 A<sup>2</sup> (observe derating)
Mechanical service life
10x 10<sup>6</sup> cycles
Output fuse
150 mA fast blow
150 mA Fast-blow
4 A gL/gG (for low-demand applications)
6 A gL/gG
Voltage
approx. 22 V DC (U<sub>D</sub> - 2 V)
Maximum inrush current
500 mA (Δt = 1 ms at U<sub>s</sub>)