Connection method
Inline data jumper
Spring-cage connection
Process data channel
8 Byte ((Operating mode: SafetyBridge))
Input address area
8 Byte ((Operating mode: SafetyBridge))
Output address area
8 Byte ((Operating mode: SafetyBridge))
Parameter channel (PCP)
0 Byte ((Operating mode: SafetyBridge))
Register length (bus)
8 Byte ((Operating mode: SafetyBridge))
Required parameter data
1 Byte ((Operating mode: SafetyBridge))
Required configuration data
5 Byte ((Operating mode: SafetyBridge))
Number of outputs
4
4 (for 1-channel assignment, + switching)
4 (for 2-channel assignment, +/- switching)
Output voltage
24 V DC (U<sub>S</sub> - 1 V)
Output current
max. 3 A (Total current of all outputs)
Maximum output current per channel
Max. current carrying capacity per output
Maximum output current per module
Behavior with inductive overload
Maximum power dissipation for nominal condition
Supply voltage
24 V
24 V DC
24 V DC (via voltage jumper)
7.5 V DC (see safety data)
Current draw
max. 230 mA
max. 3.03 A
typ. 30 mA (all outputs set including actuator current)
Supply voltage range
19.2 V DC ... 30 V DC
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics)
Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics)
Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O)
Test voltage: 24 V supply (I/O) / functional ground
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG