Connection method
Inline data jumper
Spring-cage connection
Required configuration data
Output voltage
24 V DC (U<sub>S</sub> - 1 V)
Limitation of the voltage induced on circuit interruption
Maximum output current per channel
Maximum output current per module
Output voltage when switched off
Output current when switched off
Maximum operating frequency with ohmic nominal load
max. 300 Hz (this switching frequency is limited by the data rate selected, the number of bus devices, the structure of the bus, the software used and the control or computer system used)
Reverse voltage resistance to short pulses
Behavior with inductive overload
Behavior at voltage switch-off
The output follows the power supply without delay
Output current with ground connection interrupt when switched off
Scope of supply
including Inline connector and labeling field
Operating mode
Process data operation with 4 bits
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition