Nominal input voltage UIN
Nominal input current at UIN
Current consumption from US
Note on dimensions
The height is 212 mm including fixing clips.
Color (Housing)
anthracite gray (RAL 7016)
Connection method
M12 connector
M12 connector double occupancy
M12 connector, T-coded
Note on the connection method
Transmission speed
10/100 Mbps (with auto negotiation)
System-specific protocols
Modbus protocols Modbus/TCP
Protocols supported
BootP
DHCP
FTP
HTTP
SNMP v1
TFTP
Specification
Modbus application protocol V1.1b
Description of the input
IEC 61131-2 types 1 and 3
Cable length
max. 30 m (to the sensor)
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
Sensor current per channel
typ. 75 mA (from U<sub>S</sub>)
Protective circuit
Overload protection, short-circuit protection of sensor supply
Limitation of the voltage induced on circuit interruption
Maximum output current per channel
Nominal output voltage
24 V DC (from voltage U<sub>S</sub>)
Output voltage when switched off
Output current when switched off
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Switching frequency
max. 1 per second (with inductive load)
max. 5500 per second (with at least 50 mA load current)
Reverse voltage resistance to short pulses
Signal delay
max. 150 µs (when switched on)
max. 200 µs (when switched off)