Nominal input voltage UIN
Nominal input current at UIN
Connection method
Bus base module
Push-in connection
Required parameter data
22 Byte ((I-and F-parameters))
Required configuration data
Number of inputs
4 (for 2-channel assignment)
8 (for 1-channel assignment)
Cable length
max. 1000 m (200 m from the clock output to the safe input (total based on forward and return path))
Input voltage
24 V DC (via clock outputs T1 and T2 or external supply)
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
Typical input current per channel
Input filter time
1.5 ms
15 ms
3 ms (Default)
5 ms
Application
Functional safety
only for connection to Phoenix Contact or Siemens controller
PROFIsafe
Maximum power dissipation for nominal condition
Protective circuit
Protection against polarity reversal, EMC protective circuit, undervoltage detection
Supply voltage
24 V DC
5 V DC (via bus base module)
Current draw
max. 310 mA
typ. 280 mA (all inputs set; supply by U<sub>I</sub> of 19.2 V DC ... 30 V DC)
typ. 9 mA (all inputs set; supply from U<sub>I</sub> with 30 V DC; without supply to the sensors via clock supplies T1 and T2)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
-35 °C ... 60 °C (Mounting position: any)
Air pressure (operation)
70 kPa ... 108 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
66 kPa ... 108 kPa (up to 3500 m above sea level)
Ambient temperature (storage/transport)
Permissible humidity (operation)
10 % ... 75 % (on average, 85% infrequently, non-condensing)
Permissible humidity (storage/transport)
10 % ... 75 % (non-condensing)
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)