Nominal input voltage UIN
Nominal input current at UIN
Test voltage: 5 V supply of the local bus (UBus) / 24 V supply (I/Os)
Note on dimensions
The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
Test voltage: 5 V supply of the local bus (UBus) / functional ground
EMC note
EMC: class A product, see manufacturer's declaration in the download area
Connection method
Bus base module
Push-in connection
Required configuration data
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
Current flow
linear until nominal current is reached, then constantly approx. 2.4 mA
Input filter time
< 100 µs
1000 µs
3000 µs (Default)
Protective circuit
Polarity reversal protection of the inputs; parallel diode (30 V, 5 s)
Reverse polarity protection; parallel diode; with external 5 A fuse (only for commissioning)
Short-circuit protection, overload protection of the outputs; electronic
Surge protection; electronic (35 V, 0.5 s)
Limitation of the voltage induced on circuit interruption
Max. current carrying capacity per output
Maximum output current per module
4 A (provide external protection)
Output voltage when switched off
Output current when switched off
Nominal load, inductive
max. 12 VA (1.2 H, 48 Ω, with nominal voltage)
Nominal load, lamp
max. 12 W (at nominal voltage)
Nominal load, ohmic
max. 12 W (48 Ω, with nominal voltage)
Switching frequency
max. 1 per second (with inductive load)
max. 10000 per second (with at least 50 mA load current)
max. 16 per second (with nominal lamp load)
Reverse voltage resistance to short pulses
limited protection up to 0.5 A for 1 s
Behavior with overload
Shutdown with automatic restart
Behavior with inductive overload
Signal delay
max. 100 µs (when switched off, with at least 50 mA load current)
max. 100 µs (when switched on)
Output current with ground connection interrupt when switched off