Number of interfaces
1
1 (Connected to functional ground with a capacitor)
Connection method
Inline data jumper
MINI COMBICON
Spring-cage connection
Transmission speed
1 Mbps, 800 kbps, 500 kbps, 250 kbps, 125 kbps, 50 kbps, 20 kbps, 10 kbps (Can be set via DIP switch or automatic detection)
500 kbps / 2 Mbps (automatic detection, no combined system)
Amount of process data (Input data)
Amount of process data (Output data)
Number of supported devices
Number of local bus devices that can be connected
Number of devices with parameter channel
Scope of supply
including network connector, Inline connector, and marking field
Diagnostics messages
CRC error Message about the emergency object
Faulty Inline cycles Message about the emergency object
I/O error Message about the emergency object
Inactive local bus Message about the emergency object
Inline connection error Message about the emergency object
Module change errors Message about the emergency object
Power error Message about the emergency object
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC -15 % / +20 %
24 V DC (via Inline connector)
7.5 V DC
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw
max. 0.9 A (with max. number of connected I/O terminal blocks)
typ. 51 mA (no local bus devices connected)
Power supply
max. 0.5 A DC
max. 0.8 A
max. 8 A (sum of U<sub>M </sub>+ U<sub>S</sub>)
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6
Shock in accordance with EN 60068-2-27/IEC 60068-2-27
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)