Typ. starting time with Us
Rated control circuit supply voltage US
20.4 V DC ... 26.4 V DC
24 V DC -15 % / +10 %
Rated control supply current IS
Typ. starting time with U<sub>s</sub>
Response time
typ. 20 ms (at 50 Hz input frequency)
Delay time range
0.5 s ... 20 s ±1 % (K1, K2 can be parameterized)
Rated insulation voltage
250 V AC
400 V AC with isolation paths between (L1/L2/L3) and the remaining current paths
690 V AC (with isolation paths within L1/L2/L3)
Rated surge voltage/insulation
Basic insulation 4 kV:<br/>between all current paths and housing<br/>Basic insulation 8 kV:<br/>between L1 and L2<br/>between L1 and L3<br/>between L2 and L3
Rated control circuit supply voltage U<sub>S</sub>
20.4 V DC ... 26.4 V DC
24 V DC -15 % / +10 %
Rated control supply current I<sub>S</sub>
Power consumption at U<sub>S</sub>
Inrush current
5.6 A (Δt = 400 µs at U<sub>s</sub>)
max. 5 A
min. 3 mA
Filter time
1 ms (at A1 in the event of voltage dips at U<sub>s</sub>)
Protective circuit
Reverse polarity protection
Surge protection; Suppressor diode
Limit frequency
max. 3 kHz (At voltages > 2 V<sub>RMS</sub>)
Output description
safety-related N/O contacts
Number of outputs
1 (undelayed)
2 (digital, PNP)
Switching voltage
max. 250 V AC/DC
min. 24 V AC/DC
Limiting continuous current
Sq. Total current
25 A<sup>2</sup> (observe derating)
Mechanical service life
10x 10<sup>6</sup> cycles
Voltage
23 V DC (U<sub>S</sub> - 1 V)
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)