Connection method
Inline data jumper
Spring-cage connection
Required configuration data
Note regarding the connection technology
Protective circuit
Short-circuit and overload protection; Electronic
Transient protection; Suppressor diode
Data formats
Standardized representation
Representation of output values
Load/output load voltage output
Scope of supply
including Inline connector
Diagnostics messages
Checksum error I/O error message sent to the bus coupler
Failure of the internal I/O supply I/O error message sent to the bus coupler
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC (via voltage jumper)
7.5 V DC (via voltage jumper)
Current draw
max. 45 mA
max. 70 mA
typ. 35 mA
typ. 60 mA
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Test voltage: Bus logic (local bus, communications power)
Test voltage: Functional ground
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
0 °C ... 55 °C (see “Derating” table in the data sheet)