Connection method
Inline connector
Inline data jumper
Spring-cage connection
Required configuration data
Note regarding the connection technology
Sensor types that can be used (TC)
Tolerance, relative
see tables for tolerance values
typ. ± 0.2 % (of measuring range final value, incl. tolerance of the cold junction)
Tolerance, absolute
see tables for tolerance values
typ. ± 1.9 K (Reference junction)
Measured value representation
16 bits (15 bits + sign bit)
Protective circuit
Transient protection of inputs
Scope of supply
including Inline connector
Diagnostics messages
Checksum error I/O error message sent to the bus coupler
Failure of the internal I/O supply I/O error message sent to the bus coupler
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC (via voltage jumper)
7.5 V DC (via voltage jumper)
Current draw
max. 39 mA
max. 55 mA
typ. 32 mA
typ. 38 mA
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Test voltage: Bus logic (local bus, communications power)
Test voltage: Functional ground
Conductor cross-section, rigid
Conductor cross-section, flexible