Nominal input current at UIN
Connection method
Bus base module
Push-in connection
Required configuration data
Input voltage
Power supply from clock outputs UT1 and UT2
Nominal input current at U<sub>IN</sub>
Output name
Outputs OUT24V_0 and OUT24V_1
Nominal output voltage
Power supply from U<sub>0</sub> or U<sub>1</sub>
Switching voltage
max. 30 V AC/DC
min. 12 V AC/DC
Switching current
max. 6 A (30 V DC)
min. 3 mA
Limiting continuous current
Mechanical service life
10x 10<sup>6</sup> cycles
Output fuse
6 A gL/gG (See “Application examples” section)
Protection
max. 500 mA slow-blow (for U<sub>I</sub>)
max. 6 A gL/gG (For U<sub>0</sub> and U<sub>1</sub> respectively)
Protective circuit
Surge protection of the supply voltage; electronic (35 V, 0.5 s)
Surge voltage detection; at 31 V
Undervoltage detection; at 17 V
Supply voltage
24 V DC
5 V DC (via bus base module)
Current draw
max. 163 mA (at U<sub>Bus</sub> 5 V DC)
max. 30 mA
max. 6 A
typ. 1.6 mA (Power supply from U<sub>0</sub> with 30 V DC, all inputs set without load)
typ. 10 mA (Power supply from U<sub>I</sub> with 30 V DC, all inputs set)
typ. 93 mA (at U<sub>Bus</sub> 5 V DC)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
19.2 V DC ... 30.2 V DC (including all tolerances, including ripple)
Note on the connection method
Note the specification in the section Conductor cross-sections, and stripping and insertion lengths.
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
Degree of protection at installation location