Typ. starting time with Us
< 100 ms (with Us / when controlled via A1)
Rated control circuit supply voltage US
230 V AC/DC -15 % / +10 %
42 V AC/DC -15 % / +10 %
Rated control supply current IS
typ. 15 mA (at 230 V AC)
typ. 35 mA (At 42 V DC)
Power consumption at US
1.5 W (with DC)
1.7 W (with AC)
Mechanical service life
10x 10<sup>6</sup> cycles
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Typ. starting time with U<sub>s</sub>
< 100 ms (with Us / when controlled via A1)
Typical release time
< 200 ms (Control via A1 at 230 V AC)
< 40 ms (Control via A1 at 42 V DC)
Maximum power dissipation for nominal condition
16.1 W (at I<sub>L</sub>² = 72 A², P<sub>Total max</sub> = 1.7 W + 14.4 W)
Rated surge voltage/insulation
Rated control circuit supply voltage U<sub>S</sub>
230 V AC/DC -15 % / +10 %
42 V AC/DC -15 % / +10 %
Rated control supply current I<sub>S</sub>
typ. 15 mA (at 230 V AC)
typ. 35 mA (At 42 V DC)
Power consumption at U<sub>S</sub>
1.5 W (with DC)
1.7 W (with AC)
Apparent power
max. 3.5 VA (at U<sub>S</sub>)
Inrush current
< 20 A (Δt = 100 μs at U<sub>s</sub>)
max. 6 A
max. 8 A
min. 10 mA
Protective circuit
Surge protection; 275 V varistor / 411 V suppressor diode
Output description
2 N/C contacts in parallel, floating
2 N/O contacts in series, floating
2 N/O contacts in series, safety-related, floating
Contact switching type
1 confirmation current path
4 enabling current paths
Switching voltage
250 V AC/DC
max. 250 V AC/DC
min. 5 V AC/DC
Switching capacity
1 A (AC15)
1 A (DC13)
5 A (AC15)
6 A (DC13)
Limiting continuous current
1 A (see to derating)
6 A (observe derating)
Sq. Total current
1 A<sup>2</sup> (see to derating)
36 A<sup>2</sup> (observe derating)
72 A<sup>2</sup> (observe derating)
Output fuse
1 A (gL/gG)
4 A gL/gG (Low demand)
6 A gL/gG (High demand)
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Operating voltage display