EMC note
EMC: class A product, see manufacturer's declaration in the download area
Nominal voltage for I/O supply
24 V DC (Provided via the IO-Link interface of the IO-Link master.)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Nominal current per device
typ. 35 mA (±15% (at 24 V DC), max. 70 mA)
Protective circuit
Overload protection
Overload protection; yes
Reverse polarity protection; yes
Short-circuit protection; yes
Transient protection of inputs
Wire-break detection
Test voltage: IO-Link bus logic
Test voltage: Thermocouple I/O devices
Test voltage: Functional ground
Connection method
M12 connector, A-coded
Push-in technology
Sensor types that can be used (TC)
Tolerance, relative
max. ± 0.4 % (of measuring range end value)
typ. ± 0.2 % (of measuring range end value)
Measured value representation
Reverse polarity protection
Amount of process data
64 bit (4x 16-bit input data)
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Note on dimensions
When installing, note the length of the M12 connector for the IO-Link cable and the bending radii of the TC cables.
Ambient temperature (operation)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)
Permissible humidity (operation)
Permissible humidity (storage/transport)
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6