Note
The max. load current must not be exceeded by the total current of all connected conductors.
When establishing a connection on the open housing side of a feed-through modular terminal block of the same series and size, the block must be provided with a cover if the expected insulation voltage is >320 V.
Product type
Disconnect terminal block
Maximum power dissipation for nominal condition
Number of connections per level
Internal cylindrical gage
Connection in acc. with standard
Conductor cross-section rigid
Cross section AWG
24 ... 10 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
24 ... 12 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
Flexible conductor cross-section (ferrule with plastic sleeve)
Cross-section with insertion bridge, rigid
Cross-section with insertion bridge, flexible
2 conductors with same cross section, rigid
2 conductors with same cross section, flexible
2 conductors with same cross section, flexible, with ferrule without plastic sleeve
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Nominal current
16 A (with 6 mm² conductor cross-section)
Maximum load current
16 A (with a 6 mm² conductor cross-section)
Nominal voltage
630 V (The maximum load current must not be exceeded by the total current of all connected conductors.)
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
Relative insulation material temperature index (Elec., UL 746 B)
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time withstand current 1.5 mm²