Standby power consumption PC
Nominal discharge current In (8/20) µs
Maximum discharge current Imax (8/20) µs
Impulse discharge current (10/350) µs, peak value limp
Voltage protection level Up
Residual voltage Ures
≤ 1.5 kV (at 5 kA)
≤ 1.7 kV (at 10 kA)
≤ 1.8 kV (at I<sub>n</sub>)
≤ 1.9 kV (at 20 kA)
≤ 2.2 kV (at 30 kA)
≤ 2.4 kV (at 40 kA)
Maximum continuous operating voltage UCPV
Installation location of the disconnect device
Short-circuit current rating ISCPV
Open-circuit voltage UOCSTC
End-of-life mode
OCFM (Open-Circuit Failure Mode)
Insulation resistance Riso
Continuous operating current ICPV
Surge protection fault message
Nominal discharge current In (L+) - G
Max. required back-up fuse
Flammability rating according to UL 94
Direction of action
(L+)-PE & (L-)-PE & (L+)-(L-)
Standby power consumption P<sub>C</sub>
Nominal discharge current I<sub>n</sub> (8/20) µs
Maximum discharge current I<sub>max</sub> (8/20) µs
Impulse discharge current (10/350) µs, charge
Impulse discharge current (10/350) µs, specific energy
Impulse discharge current (10/350) µs, peak value l<sub>imp</sub>
Voltage protection level U<sub>p</sub>
Residual voltage U<sub>res</sub>
≤ 1.5 kV (at 5 kA)
≤ 1.7 kV (at 10 kA)
≤ 1.8 kV (at I<sub>n</sub>)
≤ 1.9 kV (at 20 kA)
≤ 2.2 kV (at 30 kA)
≤ 2.4 kV (at 40 kA)
Response time t<sub>A</sub>
Maximum continuous operating voltage U<sub>CPV</sub>