Note
2000 + A1:2008 + A2:2012
2001 + A1:2009 + A2:2013
2005
2007 + A1:2011
Remote signaling as well as the power supply of the DIN rail connector are established by snapping the module into place on the DIN rail connector.
Maximum continuous operating voltage UC
Product type
Surge protection for information technology
Operating effective current IC at UC
Protective conductor current IPE
Nominal discharge current In (8/20) µs (line-line)
Nominal discharge current In (8/20) µs (line-ground)
Type
DIN rail module, two-section, divisible
Pulse discharge current Iimp (10/350) µs (line-earth)
Surge protection fault message
Total discharge current ITotal (8/20) µs
Voltage protection level Up (line-line)
≤ 290 V (B2 - 100 A)
≤ 290 V (C1 - 1 kV)
≤ 290 V (C2 - 10 kV)
≤ 290 V (C3 - 50 A)
≤ 300 V (C2 - 10 kA)
Voltage protection level Up (line-earth)
≤ 500 V (B2 - 100 A)
≤ 600 V (C1 - 1 kV)
≤ 600 V (C2 - 10 kV)
≤ 650 V (C2 - 10 kA)
≤ 700 V (C3 - 50 A)
Nominal voltage U<sub>N</sub>
Response time tA (line-line)
Response time tA (line-earth)
Conductor cross-section flexible
Conductor cross-section rigid
Conductor cross-section AWG
Depth
77.5 mm (incl. DIN rail 7.5 mm)
Flammability rating according to UL 94
Direction of action
Line-Line & Line-Earth Ground
Maximum continuous operating voltage U<sub>C</sub>
Operating effective current I<sub>C</sub> at U<sub>C</sub>
Protective conductor current I<sub>PE</sub>
Nominal discharge current I<sub>n</sub> (8/20) µs (line-line)
Nominal discharge current I<sub>n</sub> (8/20) µs (line-ground)
Pulse discharge current I<sub>imp</sub> (10/350) µs (line-earth)
Total discharge current I<sub>Total</sub> (8/20) µs
Voltage protection level U<sub>p</sub> (line-line)
≤ 290 V (B2 - 100 A)
≤ 290 V (C1 - 1 kV)
≤ 290 V (C2 - 10 kV)
≤ 290 V (C3 - 50 A)
≤ 300 V (C2 - 10 kA)
Voltage protection level U<sub>p</sub> (line-earth)
≤ 500 V (B2 - 100 A)
≤ 600 V (C1 - 1 kV)
≤ 600 V (C2 - 10 kV)
≤ 650 V (C2 - 10 kA)
≤ 700 V (C3 - 50 A)
Response time t<sub>A</sub> (line-line)
Response time t<sub>A</sub> (line-earth)
Input attenuation aE, sym.
typ. 0.3 dB (≤ 5 MHz / 150 Ω)
Cut-off frequency fg (3 dB), sym. in 150 Ω system