Nominal voltage UN
-48 V DC ±10 % (RRH)
60 V AC ±10 % (TN-S)
60 V DC ±10 %
Maximum continuous operating voltage UC
Protective conductor current IPE
Standby power consumption PC
Type
DIN rail module, two-section, divisible
Nominal discharge current In (8/20) µs
Maximum discharge current Imax (8/20) µs
Surge protection fault message
Optical, remote indicator contact
Impulse discharge current (10/350) µs, peak value limp
Total discharge current ITotal (8/20) µs
Total discharge current ITotal (10/350) µs
Nominal frequency f<sub>N</sub>
Short-circuit current rating ISCCR
Connection name
Remote fault indicator contact
Voltage protection level Up (L-N)
Voltage protection level Up (L-PE)
Operating voltage
125 V AC
125 V DC (200 mA DC)
5 V AC ... 250 V AC
Voltage protection level Up (N-PE)
Operating current
1 A DC (30 V DC)
5 mA AC ... 1.5 A AC
Voltage protection level Up (L+) - (L-)
Connection method
Fork-type cable lug
Plug-in/screw connection via COMBICON
Screw connection
Voltage protection level Up (L+) - PE
Voltage protection level Up (L-) - PE
Residual voltage Ures
≤ 0.25 kV (at 3 kA)
≤ 0.275 kV (at 4 kA)
≤ 0.3 kV (at 5 kA)
≤ 0.35 kV (at 10 kA)
≤ 0.4 kV (at I<sub>n</sub>)
Tightening torque
0.25 Nm
3 Nm (1.5 mm² ... 16 mm²)
30 lb<sub>f</sub>-in.
4.5 Nm (25 mm² ... 35 mm²)
TOV behavior at UT
100 V AC (5 s / withstand mode)
130 V DC (5 s / withstand mode)
Conductor cross-section flexible
0.14 mm² ... 1.5 mm²
1.5 mm² ... 16 mm²
1.5 mm² ... 25 mm²
Conductor cross-section rigid
0.14 mm² ... 1.5 mm²
1.5 mm² ... 35 mm²
Nominal discharge current In (L+) - (L-)
Conductor cross-section AWG
14 ... 2
15 ... 2
28 ... 16
Nominal discharge current In (L+) - G
Nominal discharge current In (L-) - G
Depth
77.5 mm (incl. DIN rail 7.5 mm)