Maximum continuous operating voltage UC
Note
2000
To meet the discharge conditions for DC voltages, please note the following information: "The surge protective device should be used together with a transmitter unit, which shuts down in the event of a short-circuit."
Maximum continuous voltage UC (line-earth)
Product type
Surge protection for transceiver systems
Operating effective current IC at UC
Nominal discharge current In (8/20) µs
Nominal discharge current In (8/20) µs (line-ground)
Nominal discharge current In (8/20) µs (line-shield)
Surge protection fault message
Pulse discharge current Iimp (10/350) µs
Pulse discharge current Iimp (10/350) µs (line-earth)
Tightening torque
1.4 Nm ... 1.7 Nm (N coupling nut)
Max. discharge current Imax (8/20) µs maximum (line-earth)
Max. discharge current Imax (8/20) µs maximum (line-shield)
Impulse discharge current (10/350) µs, peak value limp
Voltage protection level Up (line-earth)
≤ 1 kV (C2 - 10 kV / 5 kA)
≤ 800 V (C2 - 4 kV / 2 kA)
Voltage protection level Up (line-shield)
≤ 1 kV (C2 - 10 kV / 5 kA)
≤ 800 V (C2 - 4 kV / 2 kA)
Response time tA (line-earth)
Permissible HF power Pmax at VSWR = xx (50 ohm system)
Inner conductor surface material
Maximum continuous operating voltage U<sub>C</sub>
Maximum continuous voltage U<sub>C</sub> (line-earth)
Operating effective current I<sub>C</sub> at U<sub>C</sub>
Nominal discharge current I<sub>n</sub> (8/20) µs
Nominal discharge current I<sub>n</sub> (8/20) µs (line-ground)
Nominal discharge current I<sub>n</sub> (8/20) µs (line-shield)
Pulse discharge current I<sub>imp</sub> (10/350) µs
Pulse discharge current I<sub>imp</sub> (10/350) µs (line-earth)
Max. discharge current I<sub>max</sub> (8/20) µs maximum (line-earth)
Max. discharge current I<sub>max</sub> (8/20) µs maximum (line-shield)
Nominal pulse current Ian (10/1000) µs (line-shield)
Impulse discharge current (10/350) µs, peak value l<sub>imp</sub>
Output voltage limitation at 1 kV/µs (line-earth) spike
Output voltage limitation at 1 kV/µs (line-shield) spike