Typical input current at UN
Mechanical service life
approx. 2x 10<sup>7</sup> cycles
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
2.5 kV AC (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)
1 kV AC (50 Hz, 1 min., changeover contact/changeover contact)
Nominal input voltage U<sub>N</sub>
Input voltage range
19.2 V AC/DC ... 26.4 V AC/DC (20 °C)
Typical input current at U<sub>N</sub>
Protective circuit
Bridge rectifier, varistor
Operating voltage display
Maximum switching voltage
Limiting continuous current
Interrupting rating (ohmic load) max.
1.2 W (at 24 V DC)
40 W (at 110 V DC)
60 W (at 220 V DC)
60 W (at 60 V DC)
70 W (at 24 V DC)
750 VA (for 250 V AC)
85 W (at 48 V DC)
Note
<b>the following values are applicable if a gold layer is destroyed</b>
Ambient temperature (operation)
Ambient temperature (storage/transport)
Standards/regulations
DIN EN 50178/VDE 0160 (in relevant parts)
DIN VDE 0110b, Gr. C for 250 V DC
DIN VDE 0160 (in relevant parts)
EN 60730/DIN VDE 0631
IEC 60255/DIN VDE 0435 (in relevant parts)