Product type
PCB terminal block
Printed circuit board terminal
Type
PCB termination block perpendicular to the PCB
Solder pins per potential
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Connection method
Screw connection with tension sleeve
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
2 conductors with same cross section, rigid
2 conductors with same cross section, flexible
2 conductors with same cross section, flexible, with ferrule without plastic sleeve
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface terminal point (top layer)
Metal surface terminal point (middle layer)
Metal surface soldering area (top layer)
Metal surface soldering area (middle layer)
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Glow wire flammability index GWFI according to EN 60695-2-12
Glow wire ignition temperature GWIT according to EN 60695-2-13
Temperature for the ball pressure test according to EN 60695-10-2
Note on application
For reliable conductor connection, always adhere to a defined tightening torque.<br/>During conductor connection (mounting), the terminal blocks must be supported (held with one hand, support on the housing).