Nominal input voltage UIN
Nominal input current at UIN
min. 5 mA (at nominal voltage)
CCCex note
Use in potentially explosive areas is not permitted in China.
Connection method
Inline data jumper
Spring-cage connection
Required configuration data
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
min. 5 mA (at nominal voltage)
Sensor current per channel
Protective circuit
Short-circuit and overload protection
Scope of supply
including Inline connector and labeling field
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC (via voltage jumper)
7.5 V DC (via voltage jumper)
Current draw
0 A
max. 0.5 A
max. 35 mA
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O)
Test voltage: 7.5 V supply (bus logic)/functional ground
Test voltage: 24 V supply (I/O) / functional ground
Conductor cross-section, rigid