Test voltage: 7.5 V supply (bus logic), 24 V supply UANA / I/O
Test voltage: 7.5 V supply (bus logic), 24 V supply UANA / functional ground
CCCex note
Use in potentially explosive areas is not permitted in China.
Connection method
Inline data jumper
Spring-cage connection
Required configuration data
Note regarding the connection technology
Protective circuit
Transient protection of outputs
Representation of output values
Load/output load voltage output
Scope of supply
including Inline connector and labeling field
Operating mode
Process data mode with one word
Diagnostics messages
Failure of or insufficient communications power U<sub>L</sub> I/O error message sent to the bus coupler
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC (via voltage jumper)
7.5 V DC (via voltage jumper)
Current draw
max. 20 mA
max. 40 mA
typ. 15 mA
typ. 30 mA
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Test voltage: 7.5 V supply (bus logic), 24 V supply U<sub>ANA</sub> / I/O
Test voltage: 7.5 V supply (bus logic), 24 V supply U<sub>ANA </sub>/ functional ground
Test voltage: I/O/functional ground
Conductor cross-section, rigid
Conductor cross-section, flexible