CCCex note
Use in potentially explosive areas is not permitted in China.
Connection method
Inline data jumper
Spring-cage connection
Required configuration data
Operating mode
Process data mode with 2 bits
Special properties
24 V DC
U<sub>M</sub>, U<sub>S</sub>
With diagnostics
With fuse (U<sub>M</sub>, U<sub>S</sub>)
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Test section
24 V supply (I/O) / functional ground 500 V AC 50 Hz 1 min
7.5 V supply (bus logic)/functional ground 500 V AC 50 Hz 1 min
7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min
Protective circuit
Reverse polarity protection; Parallel polarity protection diode
Surge protection; Suppressor diode
Fuse
SI 5 x 20 6, 300 AT (in scope of delivery)
I/O voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Typical current consumption
Supply voltage
24 V DC
24 V DC (via Inline connector)
7.5 V DC (via voltage jumper)
Current draw
max. 25 mA
typ. 4 A (nominal value)
Supply voltage range
19.2 V ... 30 V (including all tolerances, including ripple)
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Power supply
max. 6.3 A (sum of U<sub>M </sub>+ U<sub>S</sub>)
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)