Test voltage: 7.5 V supply (bus logic), 24 V supply UANA / I/O
Test voltage: 7.5 V supply (bus logic), 24 V supply UANA / functional ground
CCCex note
Use in potentially explosive areas is not permitted in China.
Connection method
Inline data jumper
Spring-cage connection
Spring-cage connection with direct connector-in method
Required configuration data
Note regarding the connection technology
Protective circuit
Short-circuit protection of outputs
Representation of output values
Current output signal
0 mA ... 20 mA
4 mA ... 20 mA
Load/output load current output
Load/output load voltage output
Scope of supply
including Inline connectors and marking fields
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC (via voltage jumper)
7.5 V DC (via voltage jumper)
Current draw
max. 75 mA
max. 95 mA
typ. 60 mA
typ. 75 mA
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Test voltage: 7.5 V supply (bus logic), 24 V supply U<sub>ANA</sub> / I/O
Test voltage: 7.5 V supply (bus logic), 24 V supply U<sub>ANA </sub>/ functional ground
Test voltage: 24 V supply (I/O) / functional ground
Conductor cross-section, rigid