EMC note
EMC: class A product, see manufacturer's declaration in the download area
Product type
Current measuring transducer
Total error
≤ 1.4 % (Temperature range)
Test voltage input/output
Test voltage input/power supply
Protective circuit
Surge protection; 33 V suppressor diode
Maximum temperature coefficient
Frequency measuring range
45 Hz ... 60 Hz
45 Hz ... 65 Hz
Input current range
0 A AC ... 16 A AC (Permitted continuous overload: 120%)
Overload capacity
2 x I<sub>N (</sub>continuous)
Nominal frequency f<sub>N</sub>
Maximum switching voltage
250 V AC (when the gold layer is destroyed)
30 V AC
36 V DC
Limiting continuous current
2 A (in case of a destroyed gold layer, 250 V AC)
50 mA (for gold layer, 30 V AC/ 36 V DC)
Setting range of the response delay
typ. 0.1 s ... 10 s (Adjustable using a potentiometer)
Connection method
Screw connection
Through connection
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Housing material
Polyamide PA non-reinforced
Ambient temperature (operation)
Ambient temperature (storage/transport)
-40 °C ... 85 °C (non-condensing)
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Electromagnetic compatibility
Conformance with EMC directive
Note
When being exposed to interference, there may be minimal deviations.
Standards/regulations
EN 61000-6-4
IEC 61010-2-030